Robot lawnmowers are becoming more popular in households around the United States. These robotic lawn mowers are capable of cutting grass more quickly and effectively than human-operated equipment.
However, putting one in place might be difficult. What should you do to prepare and install a robot mower? Read this article for the best advice: Best Robot Lawn Mower.
Then now, how to install a robot mower? Understand this first.
Types of Robot Mowers
A robot mower is a piece of equipment that cuts grass for you automatically using electricity. Electric lawn mowers and electric weed eaters are other names for them. The first robot mower was introduced in the year 2000, and they have evolved since then.
Battery-operated and cordless robot mowers are the two primary varieties. Battery-powered robots do not require charging after each use, whereas cordless robots do.
Consider the features, maintenance requirements, and pricing of a robot mower before making a purchase.
How Simple to Install a Robot Mower?
In reality, it’s a really straightforward procedure that does necessitate some forethought and effort. To begin, choose a location for the charge station and arrange the loop for laying the boundary wire out from one side, around the grass, and back to the station.
Finally, decide where the guide wire from the charging station will be laid and link it to the boundary wire.
After that, it’s just a matter of laying it out on the lawn, pegging the wires to the ground, connecting the power source, and programming the schedule using the simple set-up instructions.
A quick start instruction is included for your convenience, and the operator’s handbook has all of the necessary details.
What You Do Before Install a Robot Mower
Before you begin to install a robot mower, make sure you have everything you need.
The first step is to do a rough drawing of your yard to obtain a sense of scale. It will assist you in laying out the perimeter and guiding wires. It can also help you find a good location for your charging station.
When laying out the wire, this will give you a rough concept of where the wires must run and which barriers and items may cause a particular issue.
Next, prepare the tools you’ll need for the installation.
- Cutters on the sides
- The property’s floor plan (optional)
We propose using a dead blow soft-head hammer, which has a soft covering and does not bounce off during hammering. It avoids damage to the cable and the formation of micro-cracks in the cable, which can lead to cable deterioration and breakage in the long term.
The Charging Station is Being Installed
The Charging Station Must Be Installed at the Appropriate Location
The location of the charging station is critical; otherwise, a slew of issues can arise. When deciding where to put the charging station, you should keep the following considerations in mind:
- The surface should be completely flat.
- In the immediate vicinity, there should be no slopes or inclines.
- The station should not be located in a nook or a crannie.
- The boundary wire should be able to run at right angles to the charging station’s right and left sides (3 m or more)
- A power outlet should be easily accessible (cable length varies from model to model, usually between 10 and 20 m)
- To safeguard the robotic mower and its battery, it should be in the shade.
- It’s best if the site is as central as feasible.
- It is not permitted to be used outside of the lawn.
When picking a place, it is not always possible to evaluate all of these factors. The proximity to a power outlet, on the other hand, is one of the most crucial factors. The power wire that most robotic mowers come with is usually only 3 to 5 meters long.
It’s also critical that you set up your charging station on a flat surface, away from any slopes or hills, as this can cause issues while docking.
If at all possible, the charging station’s base plate should be positioned so that it remains on the lawn. The back of the station, however, can be placed outside the lawn.
You should also leave about 3 meters of space to the left and right of the station for the boundary wire to go straight away. You should also allow enough room in front of the charging station for the guide wire to run in a straight line for at least one meter.
Only in this manner will the robotic mower be able to reach the charging station without difficulty.
In an ideal situation, the charging station would be hidden behind plants, a lawn table, an awning, or something similar. This shields the robotic mower from rain and other inclement weather.
Install the Charging Station
The real installation occurs once you’ve selected a good location for the charging station. The charging station is straightforward to set up.
To begin, attach the charging unit to the base plate. The power supply is then connected to a low voltage cable, which is finally connected to the charging station. Finally, the power supply must be connected to the power outlet. After that, the power supply is ensured.
For the time being, do not use the contained screws to secure the charging station; instead, keep it safe.
The screws are only used at the end, after the boundary and guide wires have been laid, because this makes it much easier to install the cables and allows you to move the charging station around more readily.
What Is the Best Way to Install Boundary Wire?
A boundary wire is used by EasiLife to indicate which areas should be clipped. Boundary wire should be laid around the perimeter of your lawn as well as any significant objects such as trees or hedges.
The boundary wire can be laid in two ways:
- Peg down the boundary wire to the ground – If you want to make adjustments during the first few weeks of using the robotic lawn mower, it is recommended that you peg down the boundary wire. To secure the pegs provided, use a hammer or a rubber mallet. The grass will have grown over the wire after a few weeks, making it invisible.
- Bury the wire – It is advised that you bury the boundary wire if you dethatch or aerate your lawn to avoid damage. Make sure the boundary wire is buried at least 1cm and up to 20cm into the earth.
Q. How do I put the guide wire in place?
The guiding wire serves two purposes. To begin, EasiLife must be able to return the charging station to any portion of the lawn as quickly as feasible. Second, it directs EasiLife from the charging station to remote grass sections, ensuring an even cut.
Make sure you follow step by step to install a robot mower correctly.
If you have a Husqvarna robot mower, maybe you can out more about how to install Husqvarna robot mower.
The techniques stated above can be used to install a robot mower. Don’t worry about hiring a professional to install it for you because you can do it yourself in a couple of hours. Are you ready to install a robot mower?
More Related Articles
Install a robot mower
Hi, I'm Lia! A gardening freak. My garden is my baby, and it brings me great joy to grow something beautiful. I hope by sharing my experiences you can learn something new and be inspired to do your own gardening!✨