Wood Chipper
Do you know how to remove wood chipper blades? Do you know what is wood chipper? A wood chipper is a tool used for removing the outer bark of trees and other vegetation. It consists of an electric motor, a cutting head which spins at high speed, and one or more grinding discs on the output shaft.
The wood chips are then usually collected in a hopper from which they may be ejected into a container where they can be removed. A variety of different types exist, each with varying speeds and power ratings. Wood chippers range in size from small handheld models for trimming hedges and shrubs to large industrial machines capable of processing up to 200 cubic yards of debris per hour. In this blog, we also have best wood chipper that you might want to read about it.
How Does Wood Chipper Work?
So, how does wood chipper work? The cutting heads found on most wood chippers have two sharpened rotating steel discs that shred the wood as it enters the machine. These disks spin at very fast rates so that the wood pieces become pulverized into smaller particles. Once the wood has been reduced to this fine particle size, the material falls into a collection bin on top of the unit. This type of machine is often referred to as a “chip-type” chipper because of its ability to produce chips instead of mulch. Most chip-type units use either an auger or screw conveyor system to move the ground material out of the discharge area.
Benefits of Wood Chipper
There are many advantages associated with using a wood chipper:
- Low Maintenance – Compared to conventional outdoor equipment like rakes, hand tools, and gas powered trimmers, wood chippers require little maintenance because they run on electricity rather than gasoline. In fact, it’s possible to avoid all the costly repairs and downtime costs when operating a wood chipper.
- Reduce Dependence On Chemicals – Since they cut through hard material such as tree branches and twigs without damaging them, wood chippers don’t leave behind any harmful chemicals. They also won’t disturb the soil in your yard. This means that you don’t need to apply fertilizer or pesticides after working on your lawn or garden.
- Save Money And Time – By eliminating the need to manually gather leaves, grass clippings, weeds, etc., a wood chipper will save time and money while improving the appearance of your property.
- Help Protect Against Wildfires – Because they reduce fuel loads and eliminate flammable materials close to buildings.
How to remove wood chipper blades
Things Required:
Because you cannot remove the blades with your naked hands, you must protect yourself with the following tools:
- Set of sockets
- Mallet made of rubber
- Gloves
- Screwdriver
- A pair of wrenches
Ascertain that all of the things listed above are accessible before beginning to remove the chipper blades. These tools may also be used to install replacement blades if necessary. Prior to proceeding, you should also take the following precautions:
- Tuck your shirt in and secure any loose clothing to avoid the blades or chipper from yanking them away while you dismantle these components. Additionally, avoid wearing baggy clothing to prevent harming yourself.
- Tie your hair back to prevent it from blowing into the blades or other chipper components.
- Wear protective eyewear, gloves, and ear protection, particularly if you want to sharpen the blades after they are removed.
How To Do It
Step 1: Deactivate the engine
Ascertain that you have shut off your engine and placed the key in a well-known position to prevent it from going missing. This also assists in preventing the engine from operating, which prevents the blades from spinning. If using an electric chipper, ensure that the plug is disconnected from the mains.
Step 2: Remove the spark plug from the gas chipper
Remove the spark plug from the gas chipper using a spark plug remover.
Step 3: Unscrew inspection plate
Remove the inspection plate by turning the screws with a socket wrench. Numerous wood chippers have an inspection plate as a means of accessing the blades. The plate is positioned ahead of your machine, about 18 inches from the ground. It enables you to easily remove dirt from the blades.
Step 4: Unscrew It Counterclockwise
When your machine is completely unplugged, it is much easier to handle, and this is the only method to begin the blade removal operation. After removing the inspection plate, the blades are easily accessible. Bolts secure the blades, so unscrew them in an anticlockwise orientation. If these bolts seem to be too tight, tap them with the rubber mallet to loosen them. Following that, you may either sharpen or replace the blades, depending on their condition.