How to revive a Jade Plant? This 1 (one) mind-blowing technique will bring back your dying Jade!

How to revive a Jade Plant?

Seeing your Jade grows big has been the dream of every gardener!

Taking care of Jade Plant sounds simple enough…

…yet it’s something many of us struggle with doing correctly in order to know How to revive a Jade Plant?

That’s because there are actually many variables that can make it tricky to know exactly when to water and how often….

when to prune it…

and the required sunlight…

As usual, before jump in directly in answering all of your questions…

…in order to know How to revive a Jade Plant?

Let’s us first take a look on Jane’s story!

My Jade Plant is dying!

Do you hear that?

Yes, it dies…

…and I can do nothing to save it.

I did not even know what cause it to death….

As far as I know I have taken care of it rightly…

I love it so….

so much till it hurts…

How to revive a Jade Plant?


How to revive a jade plant?
How to revive a Jade Plant?
credit: https://balconygardenweb.com/growing-succulents-infographics/

From Jane’s story above…

It underlines the fact that…

It’s all about how we taking care of our Jade rightly and even more…

…willing to look on ore information in dealing with all of problems arise…

Sounds impossible?

Let me tell you one thing…

Nothing is impossible when it comes to gardening…

as long as we know the secrets techniques..

Ups, I’m sure that you can’t wait any longer…

So…

How to revive a Jade Plant?

You only need to know one thing…

Do a right pruning method!


How to revive a jade plant? 2
How to revive a Jade Plant?
credit: https://balconygardenweb.com/growing-succulents-infographics/

The jade plant, scientifically referred to as Crassula ovata, is a succulent shrub native to the Eastern Cape of South Africa.

This drought tolerant tree grows green foliage…

…has reddish and purple hues and blooms pink and white flowers.

Because jade grows easily and resists most diseases and predators…

…wilting or distressed jade plant is easily cured.

Watch out these factors!


If the Jade plant is losing leaves due to drought stress

….which then it requires a good soak.

Place the pot in a basin of water for 10 minutes to allow the water to infiltrate the soil properly.

If the soil has dried out completely it can often repel water from the surface so submerging the root ball for 10 minutes allows the water to absorb properly…

…so that the roots can draw up the moisture the need.

How to revive a jade plant? 3
credit: https://smartgardenguide.com/why-is-my-jade-plant-dropping-leaves/

Always water jade plants with a generous soak.

Watering little and often only moistens the top inch or so of the soil and the moisture does not reach the roots where it is needed.

Soak the soil so that excess water emerges from the drainage holes in the base to ensure the Jade plant is watered properly.

Establish a good watering regime for Jade plants.

Feel the soil at the bottom of the pot through the drainage hole in the base.

If the soil still feels moist then delay watering for a few days.

When the soil turns dry to the touch, this is the perfect time for watering.

Ensure that the jade plant has some direct sun.

Jade plants prefer at least 4 hours of sun.

Gradually expose your jade to more hours of sun rather then all at once as the contrast can burn the leaves and cause them to drop off.

Move the jade plant pot so that it is exposed to a few minutes extra of sun per day so the jade can acclimatize properly.

Ensure that jade plant does not get too hot or too cold.

The optimal day time temperature for jade plants is around room temperature at around 65°F to 75°F (18°C to 23°C)…

….with a night time temperature of around 55°F (12°C) or more.

If the temperature is significantly out of this range…

…then this can contribute to the leaves falling…

…so keep the jade plant is a room with consistent temperatures whilst it revives.

Ensure that the leaves of the jade plant are not in contact with a window.

Sometimes cold or even frosty windows in winter can cause any leaves that are in contact to fall off and die back.

Now, master these steps while prune your Jade!


Use sharp, sterile scissors to prune away any dead branches (check this article out if you have lots of broken stem).

Make an angular cut as close to the branch as possible to ensure rapid healing.

Avoid pruning away any withering foliage as these leaves may rejuvenate.

Remove the jade plant from its potting container and place the plant on a clean, flat surface.

Be careful!

Gently remove excess soil from the roots.

Trim back any dead or dying roots in the root system.

Use sharp, sterile scissors to complete the root pruning process.

Hold the distressed root in one hand and trim back the individual root at the base of the system.

Remember, avoid trimming more than one third of the root system.

Repot the jade plant using clean, nutrient-rich soil mixed with an equal amount of organic compost.

Line the bottom of a well-drained potting container with a layer of prepared soil.

Position the jade plant in the center of the container and fill it with the potting soil.

Use a clean, moist cloth and gently clean the foliage of the plant…

…and removing any soil or dust.

Irrigate the jade plant thoroughly while allowing excess water to run out the bottom of the container.

Here’ s how

Use a misting bottle and spray a fine mist across the foliage.

Place the newly repotted jade plant in a warm location that receives at least six hours of full to partially shaded sunlight each day. Not enough sunlight could make it etiolated and makes it leggy.

Choose a location that provides morning sun and afternoon shade to prevent sun damage and distress.

Avoid locations near excessive heat or temperature variations such as heating vents or air conditioning units.

Keep reading…

Allow the soil of the jade plant to dry out completely between watering.

Place your finger in the soil near the root system…

…approximately 1 1/2 to 2 inches deep.

Water the plant when the soil feels dry and foliage begins to show signs of drooping.

Feed the jade plant only when it shows signs of improved health.

Here’s the interesting part…

Look for firmly filled foliage with a rich green color and strongly developed branches.

Feed the jade plant in early spring just before the growing season begins.

Use a well-balanced, slow-release fertilizer such as a 10-10-10 or 20-20-20.

Conclusions

I hope this post is able in answering: How to revive a Jade Plant?

Now I’d like to know what you have to say.

You are already know How to revive a Jade Plant? in the most easiest and fastest ways….

…that I’m sure there are not many people aware of it…

So, is it impossible to bring back your dying Jade?

Of course, not!

As now you, yourself, are able to do it, right?

If you still have any questions on our topic of How to revive a Jade Plant?

…or even you need to know a more detailed steps to do in dealing with it….

…feel free to contact me!

More Related Articles For You

https://allthingsgardener.com/5-superb-tips-jade-in-rainy-season-2021/
https://allthingsgardener.com/how-to-propagate-jade/
https://allthingsgardener.com/why-choosing-jade-as-houseplant/
https://allthingsgardener.com/jade-plant-as-medicine/
https://allthingsgardener.com/brown-leaves-on-variegated-jade/

Was this helpful?

Yes
No
Thanks for your feedback!