Do you know how to sharpen reciprocating saw blades? Dull reciprocating saw blades frequently result in improper material cutting. Maintaining your saw properly is critical to obtaining the most accurate cut.
Maintaining a razor-sharp saw is an integral aspect of that regime’s care. Additionally, you should be aware of the sort of sharpener that produces the greatest results. Maintaining the sharpness of your saw’s blade extends its life. Additionally, the motor’s performance improves, resulting in higher-quality cuts. Additionally, this maintenance helps you save time and money. In this blog, we also have an article about reciprocating saw that you might want to see.
What Can We Use For Sharpening?
Utilization of a Taper File
Sharpening your saw blade with a tapered file is one of the most effective methods. You will require a taper file, either small or large. The file you make will be determined by the size of the teeth on your reciprocating saw. While sharpening reciprocating saw blades, either a double-cut or single-cut file will suffice.
Taper files are triangular in shape. This function enables it to file both the front and back of a tooth. However, for the greatest results, you should use the suitable file. In this instance, a tiny file will be required. This file will assist you in achieving a more polished finish on the blade of your reciprocating saw.
Having stated that, you will require the following before beginning to sharpen your saw blade.
- A set of saws
- A spare piece of wood
- A flaw
Sharpening Diamond Wheels
You can use diamond sharpeners to hone your saw blade. You’ll need a diamond saw blade to install your reciprocating saw blade on. If you do not already own one, you can select between a Kobalt 10- or 7-inch dry/wet continuous diamond blade.
Ascertain that the grinding wheel you choose has a profile that matches the profile of your blade. Due to the flat edges on the majority of wheels, they are regarded a simpler method of sharpening a saw blade.
All that is required is for the saw blade teeth to pass through the wheel. This straightforward procedure enables you to touch up a blade in a matter of minutes.
How To Sharpen Reciprocating Saw Blades
Examine the Saw
Ascertain that all teeth are the same height. Clamp the blade in a vice if there are any variations. Hold the reciprocating saw blade in the vice with a strip of wood. Then, using a smooth metal file, lower the teeth’s projecting height.
Following that, inspect the blade for damage. Bear in mind that corrosion and other flaws can cause the blade to become stuck in the stock.
Adjust the Teeth
Ascertain that the kerf is the proper width. Misaligned teeth result in undesirable cuts regardless of the saw blade’s sharpness. This issue can be resolved with the aid of a saw set. Similar to a pair of pliers, a saw set is a pair of pliers. It features a pivot, teeth, and lengthy handles. In a saw set, clamp the reciprocating saw blade. Tighten the hammer disk and apply pressure to the teeth to ensure they are aligned closely.
Squeeze the saw set handles to shape each tooth. You should begin with a point in the center, with matching sets on either side. Saw sets are more effective when using saw blades with fewer teeth. Alternatively, if your blade has a high tooth count, you can consult an expert.
Begin at one end and position the saw set with the first tooth. Squeeze the handles and repeat the process with the saw blade. Always skip the subsequent tooth as you work. On the blade, the teeth are not in the same order. Reverse the blade and repeat the procedure with the teeth facing in the opposite way.
Adjust the Saw Blade
Retrieve the saw blade and inspect it for good sharpening. Then, connect the saw to the power source and turn it on. Make an attempt to cut a piece of material. Cutting should be effortless. Furthermore, the cut edges must be smooth and consistent.
Protect the Saw Blade
To safeguard the blade’s metal, clamp it in the vice using wooden strips. The clamping provides stiffness to the blade. Maintain a 60 percent file angle as you move across the teeth. Assure that the file is used on both the back and front of the teeth. To get an even finish, use two strokes each tooth.