How to start a 2 stage snow blower? There are many different types of snow blowers available, each having its own advantages and disadvantages. Each model is designed to meet the needs of a specific type of user, and if you are in need of a 2 stage snow blower, this article will help you make the right choice. In this blog, we also have an article about reviews of two stage snow blower that you might want to read about it.
What is snow blower?
Snow blower is a type of snow-clearing machine used to remove snow from the ground. It is an important tool for people who live in cold climates where snowfall is frequent. Snow blowers work by spinning the snow into a fine powder which is blown away by a fan. It usually consists of a long, horizontal bar that is connected to the engine, with a rotating blade at the end.
A snow blower or snow thrower is a machine for removing snow from an area where it is problematic, such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway.”Wikipedia.org
What is 2 Stage Snow Blower
A 2 stage snow blower is an outdoor power equipment that moves snow and ice in the driveway and around the property. These machines are available in different sizes, shapes, and power ratings. 2 stage snow blowers work by breaking the ice and snow into smaller pieces so that they can be easily removed. This type of machine also helps reduce the overall amount of time needed to clear your driveway. Below, I will tell you about how to start a 2 stage snow blower.
Two-stage snow blowers are great for handling all types of snow on any surface. For example, a two-stage may be an ideal choice for those with gravel driveways, since they don’t clean all the way to the ground which helps avoid pieces of gravel getting into your snow blower’s auger.”simplicitymfg.com
How To Start A 2 Stage Snow Blower?
1.) Adjust the choke to the FULL position.
FULL Choke indicates that the choke has been closed. This cuts off the air supply to the carburetor, resulting in a higher fuel combination required to start a cold engine. Once the engine has warmed up, return the choke to RUN.
2.) Adjust the Throttle to the FAST Position (rabbit symbol)
Always use your snow blower in the FAST position.
3.) Deactivate the fuel shutoff valve.
The fuel shutdown valve controls the flow of fuel between the fuel tank and the carburetor. To begin, open or set the valve to the ON position. Close the fuel shutdown valve while the snow blower is not in use to eliminate the possibility of leaks.
4.) Set the Ignition Switch to the RUN position.
The ignition switch, often known as the rocker switch, is used to activate the ignition system. When started, set the switch to RUN and then back to STOP when not in use.
5.) Place the Safety Ignition Key in the ignition.
Your snow blower’s little plastic or metal ignition key is a critical safety feature. Removing the key while the snow blower is running will cause the engine to shut down, which is useful if you need to stop fast for an emergency.
Insert the key into the lock until it clicks into place. Certain snow blower engines operate without the need of a key, relying instead on an ignition switch.
6.) Light the Primer Bulb
When the priming bulb is pressed, a little quantity of fuel is injected into the carburetor. Depending on the manufacturer’s recommendations, 2-3 presses of the primer is adequate to assist in starting a cold engine.
7.) Retrace the Starter Rope
Pull the starting rope softly until you feel the recoil engage, then pull the rope hard and fast to start the engine.
Types of 2 stage snow blowers
There are three main types of snow blowers on the market today–front loaders, side loaders, and walk behinds. Depending on what kind of application you have on your property, one of these may best suit your needs.
Front Loader Snow Blowers
This type of snow blower has an endless conveyor belt attached to the front of it that pushes snow forward along the drive way, allowing you to push the snow out of your driveway without having to lift a finger. Front loader snow blowers tend to move more snow than other models, but they do not offer as much maneuverability. They are ideal when clearing large amounts of snow from sidewalks or parking lots.
Side Loader Snow Blowers
The side loader also uses an endless conveyor belt to push the snow toward the back of the machine, but instead of pushing the snow out of the driveway, it ejects the snow onto a flat surface near the rear of the machine. The operator then lifts the tailgate and shovels the accumulated snow into their vehicle. Side loaders generally provide less output than front loaders, making them ideal for residential applications.
Walk Behind Snow Blowers
These snow blowers are similar to small cars. They use a hydraulic motor to spin the blades, which makes them very easy to operate. Many walk behinds come equipped with two speeds so that you can choose between fast and slow operation. Walk behinds are ideal for homeowners because they don’t require any special training to operate. However, they only provide limited maneuvering capabilities, and are not recommended for commercial operations.
When should I buy a 2 stage snow blowers?
You must consider several factors before buying a snow blower. First, you want to decide whether you need a heavy duty or light weight model. If you plan to clear a lot of snow over a short period of time, such as during the winter months, you’ll probably want to invest in a heavier duty machine.
On the other hand, a lighter weight model is better suited to those who only need to clear snow once per year. Secondly, you’ll want to determine how often you’ll be using the snow blower. You may find yourself needing a new model every few years, depending on the size of your home’s driveway and the frequency of snowfall.
Maintenance Tips For Your Snow Blower
Check the oil level frequently and add oil as required. Check the spark plugs and battery terminals before starting the machine. Remove the muffler and clean the exhaust system regularly. Make sure the snow blower’s discharge chute is open to release excess snow.