How to start a two stage snow blower? Snow blowers are the go-to tool for those who want to clear a driveway, parking lot, or walkway. They provide ease of use and comfort for users. While there are many types of snow blowers available in the market, some can be difficult to start. This guide will show you how to start a two stage snow blower by reading this article until end. In this blog, we also have an article about husqvarna two stage snow blower brand that you might want to read about it.
A snow blower or snow thrower is a machine for removing snow from an area where it is problematic, such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway.”Wikipedia.org
What is two stage snow blower?
A two stage snow blower is a type of snow thrower that features two impellers on the same shaft. This allows the snow thrower to move and dump the snow into the hopper in two stages. This type of snow thrower is designed to work best on light to medium snowfall. They are also used for clearing driveways, sidewalks, and walkways. .
Stage snow throwers come with a snow deflector and a deflector bar, which makes it easy to change from a side discharge to a down-the-road discharge. A first stage is there for lighter snow and a second for more heavy snow. There is usually a lever on the handle that you turn to change from one to the other.
Now, to be honest, you don’t need your snowblower to throw snow up to 12 feet down the road! How many people will be standing that far off? Don’t worry though, whatever you get, you can always get a bagger for it later. Now, I think my dad and uncle can attest to this, snowblowers are incredibly loud. So, be sure to invest in a pair of noise cancelling headphones. These will not only save your hearing, but they can also be used for other things besides.
Two stage snow blowers are also wider, lending themselves to being able to take fewer passes to clear a large area and are generally recommended for people who have more than a sidewalk to clear. They also have taller intakes, making them able to handle deep snow drifts.”snowblowersatjacks.com
Benefits of having two stage snow blower
One of the best benefits of having two stage snow blower is that it helps you clean the snow from the roof of your house without causing any damage to your roof. It also prevents you from any possible accidents while doing so. It is also very easy to handle. Here are the benefits having two stage snow blower:
- The first benefit of having a two stage snow blowers is that it can be used for both small and large houses.
- This machine cleans off all the accumulated snow on your roofs by making use of its two separate stages.
- When this two stage snow blower comes in contact with the snow, it will make use of an array of blades which are attached at the front of the snow blower.
- These blades will cut off the snow as they come into contact with them. Once the blade hits the snow, it will get pulverized into smaller pieces.
- You can adjust these blades according to the size of the snow. It is always advisable to take care of your roof while cleaning it off because if you do not give enough time to remove the snow, it may cause heavy damage to your roof.
- If you have an open area where you want to clear some snow, then you should consider getting this two stage snow blowers..
How To Start A Two Stage Snow Blower
Set up the Choke to FULL.
Full Choke indicates that the choke is completely closed. This cuts off the air supply to the carburetor, resulting in a higher fuel combination required to start a cold engine. Once the engine has warmed up, return the choke to RUN.
Turn the Throttle to the FAST setting
Always use your snow blower with the throttle set to FAST.
Deactivate the fuel shutoff valve.
The fuel shutdown valve controls the flow of fuel from the fuel tank to the carburetor. To begin, open or turn the valve to the ON position. Close the fuel shutdown valve while the snow blower is not in use to limit the possibility of leaks.
Press the RUN button on the ignition switch.
The ignition switch, often known as the rocker switch, activates the ignition system. When started, set the switch to RUN, and when not in use, return it to STOP.
Put in the Safety Ignition Key
Your snow blower’s little plastic or metal ignition key is a crucial safety feature. If you remove the key while your snow blower is operating, the engine will shut off in case you need to stop fast for an emergency.
Insert the key until it clicks into position. Some snow blower engines merely need an ignition switch and do not require a key.
Light the Primer Bulb
When you press the priming bulb, a little quantity of gasoline is pumped into the carburetor. Depending on your manufacturer’s guidelines, tapping the primer 2-3 times should be enough to get a cold engine started.
Use the Starter Rope (Clog)
Pull the starting rope gently until you feel the recoil engage, then pull the rope forcefully and fast to start the engine.