How Do I Know If I Need to Water My Snake Plant? We Have Some Awesome Tips for You! (2021)

What is the best way to determine if a snake plant needs water? Growing snake plants can be challenging, so you might end up asking the same question. The purpose of this post is to share some of the basic information regarding watering snake plants with you.

Snake plants are among the most popular succulent plants. Despite its resilience and resilience to neglect, it is often considered capable of surviving.

Snake plants are resilient, but they do have some limitations. They require water to survive, just like other succulent plants. They could die if water is not provided.

How can you tell if the snake plant needs water?

Snake plants exhibit many symptoms associated with underwatering. They tend to droop, become dry, brittle, and wrinkled, their leaves curl, turn yellow or brown, and fall, the soil is dry, and their growth is sluggish if they are underwatered.

There is a high chance that your snake plant needs water if you see some of these symptoms. Now let’s dig deeper into the signs of underwatering in snake plants.


Underwatering Signs

In snake plants, there are many signs of underwatering that can be observed. Snake plants become dry when they do not receive enough water.

I will describe the symptoms of underwatering a little bit deeper in this section. Consider watering your snake plants before they finally die if you see some of these signs.


Leaf Wrinkles

Snake plants’ leaves wrinkle when they are underwatered. Leaves have wrinkles that are thin lines that appear on different depths of the leaves.

Wrinkles on leaves can also be caused by overwatering. It is important to note that overwatered snake plants have dry, brittle leaves instead of mushy ones.


The Leaves Are Falling Over

The leaves of underwatered snake plants tend to fall over in addition to being wrinkled. However, before that happens, the leaves begin to droop and become lifeless. Water is in short supply in this area.

The lack of water can adversely affect succulent plants, even though they store it in their stems and leaves.

When I first began growing snake plants and other succulent varieties, I believed that these plants could survive in complete neglect. I turned out to be wrong.

Water is necessary for succulent plants like snake plants.


Discoloration of Snake Plant Leaves

The discoloration of the tips of snake plants is another sign of underwatering. Due to a lack of moisture reaching the tips of the leaves, this occurs.

There is nothing you can do to revive the tips of the leaves. The color will not return to green as it was.


Drying of the Edge of the Leaves

Underwatering may cause the edges of the leaves to dry out. The edges of the leaves are not getting enough moisture because the moisture can’t get to them. The furthest part of the valley becomes dry as a result.

Underwatered snake plants usually turn yellow or brown along their edges. Additionally, they become too dry and brittle. The leaves will eventually die if underwatering persists for too long.


Leaves Curling

There was severe underwatering in snake plants accompanied by curling of the leaves. It indicates that the snake plants are too thirsty. A circle will be formed as the leaves bend and curl.

The whole plant will die if this condition is not corrected soon. Snake plants that are underwatered are easier to fix than those that are overwatered. Underwatering can also be fatal to succulent plants in extreme cases.


Leaves Turning Brown

If you see some of the leaves of your snake plant turning brown, something is wrong. Underwatering is one of the most common causes of this.

You need to water your snake plant. Before it becomes too late, you must act right away. Snake plant foliage that turns completely brown indicates that it has been severely underwatered.


Dry Soil

As opposed to other plants that need to be watered every day, succulents like snake plants require very little water. Instead, these plants only need a small amount of moisture. Despite this, they cannot survive without water.

Soil that has been dry for a long time can be detrimental to snake plants. Healthy growth requires water. Plants without water will eventually die.

Make sure the soil is not underwatering if your snake plant starts to show symptoms. It is likely that the soil will dry out.


Slow Growing Pace

It is also a sign that the snake plant is struggling when it grows slowly. Underwatering is one of the causes of this problem.

Plant growth is hindered by a lack of water. Slow growth, however, is difficult to observe. The most common indicators of underwatering are wrinkling and discoloration of the leaves.


How Do You Revive a Snake Plant Underwater?

Snake plants that have been submerged can be fixed. The underwatered ones can be revived. Overwatered succulents require more work than the process described here.

When reviving underwater snake plants, you just need to consider the following:


Apply Good Watering Techniques

If your snake plant is underwatered, it means that the watering strategy you employed did not work. It may be necessary to use a more appropriate watering technique.

Using the soak and dry method is the best way to water my succulent plants. By watering this way, the soil is soaked completely and the excess water is then allowed to drain. Once the soil has dried, water again.

It is important to make sure that the pot is well-draining and the soil is designed to drain quickly before using this watering method. A drainage hole should be used to remove the excess water.

I suggest that you avoid applying the soak and dry watering technique if you are using a pot with a hole. In this case, soaking could result in overwatering, which is harmful to snake plants.


Use the Right Type of Water

It is not always enough to use the right watering strategy. Snake plants require quality water. You should provide filtered water.

This is due to the fact that unfiltered or low-quality water contains substances that accumulate in the soil. Snake plants may be adversely affected by these chemicals.

Therefore, I suggest you avoid watering your snake plants with tap water. A snake plant that has been underwatered for a long time should not be under water.


Use the Right Container

Using the right container is the next thing you need to consider when fixing the underwatered snake plant. Snake plants’ health is greatly influenced by the pot in which they are planted.

You should consider the following:


Container Size

You should always choose a container with a larger diameter than the root ball when buying a snake plant. As a result, plants will grow slower in smaller pots.

However, avoid using a large container as well. Overwatering could potentially result from too much moisture being retained.


Select the Right Type of Container

In addition to the size of the container, you should also consider the drainage hole. By draining excess water during watering, it prevents it from being trapped at the bottom of the pot.

With a clay pot, I had great success. In addition to allowing for good air circulation, clay pots also help keep roots healthy.

Another great thing about clay pots is that they protect snake plants from extreme environmental changes. You can grow snake plants outdoors in the clay pot, especially if you do so outdoors.


Pick the Right Succulent Soil

In addition to the pot, the type of soil in which the snake plants are planted is also important. Snake plants grow in soil that drains water and aerates well.

A succulent soil mix is available on the market. If you want, you can also make your own soil. However, in my case, I always use commercially available succulent soil. It is easy to use because the instructions are also easy to follow.


Keep The Plant in a Stress-Free Location

In order for the underwater snake plant to recover, the environmental conditions must be ideal. Placing the plant in a safe location is the best thing to do. There should be no human or animal disturbances. The plant will be able to recover faster as a result.


More Related Articles for You!

https://allthingsgardener.com/underwatered-snake-plant-look/
https://allthingsgardener.com/underwatered-or-overwatered-snake-plant/
https://allthingsgardener.com/suitable-water-for-your-snake-plant/

Was this helpful?

Yes
No
Thanks for your feedback!