General Planting Of Snake Plant
Don’t Let Your Snake Plant Leaves Fall Over!
Regardless of the light or moisture exposure, your snake plant will probably flourish.
The popularity of the plant is based both on the beauty and robustness of its profoundly shaded green leaves and height.
It can be placed in environments from very bright light to rooms with almost no sunlight and it will adjust…
…but they are better suited to indirect, constant light in rooms.
They prefer temperatures between 70 and 90 degrees Fahrenheit, and will not tolerate temperatures below 50…
…or a spot near a drafty window. Here’s the link for you to know more about planting care of this snake plant.
Here we have the story from Jennie about her snake plant leaves fall over issue!
Let us hear Jennie’s story
I have a snake plant. It was getting pretty tall so I decided to cut it back and give it a trim.
I watered the pot during my lunch break, but when I came back from work, something felt off about the plant.
The leaves had all drooped over in an unusual way that wasn’t natural for any of them to do by themselves…
…like they’d been pulled down or something. So what could have caused this?
I research all the way through on the internet for how to fix this. How to take care of it and finally I found the full guide of it!
I do all the things that I have been studied and applied in on my plant.
After 1 month having full time of recovery for my snake plant. Finally this plant is going back to normal…
…and back into her healthy state!
The main cause of snake plant leaves falling over is overwatering, and this is the main issue that comes up generally with these amazing plants.”Hayley, Author from osera.org
Here’s the main thing…
The Snake Plant’s History
Sansevieria (Snake Plant) is a perennial with a long history. This evergreen plant was named….
..after Italian inventor Raimondo di Sangro, Prince of San Severo by Swedish botanist Carl Peter Thunburg (1710-1771).
The snake plant has been grown for more than 250 years and has been in the US foliage trade since the 1920s.
Snake Plant Leaves Fall Over!
Why are the leaves on my snake plant falling over? Snake plants are amazing plants that have a dramatic vertical growth pattern.
Snake plant leaves are firm and grow straight up, reaching impressive heights of four to five feet in some cases.
These leaves should be able to grow vertically with little difficulty if they are properly cared for.
However, the leaves of your snake plant may soften, fall over, or even die on occasion.
This can be extremely distressing, and you may be left wondering, “Why are my snake plant leaves falling over?”…
…while you attempt to save your plant But don’t worry; there are usually a few common causes…
…that aren’t too difficult to address if you catch them early enough.
It’s possible that you won’t be able to save every leaf, but it’s not necessarily too late to save the plant.
Causes Of Snake Plant Leaves Fall Over
Let’s look at some of the most common causes of snake plant leaves falling over, how to spot them…
…and what we can do to save our plant and avoid the problem in the first place.
Overwatering and overwatering these plants are the most common problems, but luckily, the difference is usually easy to spotted.
Overwatering Snake Plants
Overwatering is usually the major cause of snake plant leaves falling over, and this is the main problem…
…with these amazing plants. Snake plants can go a relatively long period without water since their long thick leaves…
…store their moisture just like that of a cactus or succulent.
The soil should not be watered on a weekly schedule if it appears too wet.
Instead, you should test the moisture before every watering and let the soil be allowed to dry between waterings.
If you water your plant too often then you may notice the leaves starting to soften and feel squishy to the touch…
…they may also turn yellow or even black in places and your plant will start to decline rapidly.
To find out for certain, test the soil moisture level. Does it dry in the shade or is it wet to the touch?
It’s best to measure using a moisture meter so that you can measure deeper and closer to the root ball.
Do you recognize this as your plant? If so, you’ve probably found its cause.
It’s imperative that you take action as soon as possible as these plants can succumb to root rot which can ultimately kill them.
If it’s just a couple of leaves, you may be able to get away with letting your plant dry out and then watering it less often.
Ensure that the pot your plant is in has drainage holes so that any excess water will drain away…
…from the plant and not pool around the roots. Terracotta pots are ideal for snake plants because…
…they wick moisture away from the roots and into the pot. When your plant is in decline, do not leave it there…
…and force the moist soil away from the roots.
Allow your plant to fully dry after removing any dead plant matter before potting.
Make sure to carefully use a well draining potting medium to prevent this from happening again.
With snake plants, potting mixes made for cactus and succulents tends to work well, and you can add perlite to help with aeration.
You might be able to save some leaves to propagate your plant if it is mostly rotten and you can save the mother plant.
Simply cut a healthy leaf as close as possible to the plant. If there is some rot, be sure to cut it out…
….before it spreads up the vine, and make sure your scissors are clean.
After you’ve cut your plant, keep the leaves in a warm place for a few days to dry out the ends.
Planting your leaves too soon will cause them to absorb too much moisture from the soil and rot.
It’s time to repot once the ends have healed over. You’ll need a light mix and a pot with drainage holes to get started.
With your new watering schedule your plant should be just fine and if you do struggle…
…then try using a moisture meter to help you know when it’s time to water your plant.
Underwatering Snake Plants
However, this is a rare event, but it is also possible that your leaves are falling because they are being drowned.
People who have heard that snake plants do not require much water find it easy to over water them…
…and dehydrate their plants when making this mistake. It’s important to note, though…
….that just because they don’t need frequent watering doesn’t mean they don’t require any.
Allowing your plant to dry out between waterings is important, but once it has dried out, you must water it again.
This may be the cause of your snake plant leaves falling over if you live in a hot climate…
…or if you leave watering for weeks at a time. Is the soil in your pot completely dry?
Do you go for weeks without watering your plants? Do you live in a hot climate where your plant receives a lot of direct sunlight?
If you answered yes to all of these questions, it’s very likely that you’re underwatering.
If the leaves are dehydrated, they can shrivel and turn brown. Fortunately, a snake plant may withstand a drought…
…so unless it’s on the verge of dying, you should be able to save it by watering it…
…then watching it and watering it again once it’s dried out.
If some leaves can’t be saved, don’t feel bad about chopping them off.
This simply ensures that the plant will devote more resources to saving the remaining leaves.
Last but not least…
Your Snake Plant May Need Fertilising
This is a less common cause of snake plant leaves falling over, but if you’re keeping up with your watering…
…it’s worth considering. You can get away without using plant food if you’ve used new potting soil.
If you’ve potted your plant in old soil, however, the nutrients may have been depleted…
…and you’ll need to start fertilizing it. During the growing season, once every two weeks should suffice…
…and during the winter months, you should refrain from watering your plant.
Hopefully, this information has helped you figure out why your snake plant leaves are falling over and how to fix the problem.
If you’re still unsure, let us know in the comments section below. Please include as much information as possible…
…about your snake plant’s care and environment and we will do our best to assist you in resolving the problem.
See having Snake plant is good choice for you to have! It’s cool, its famous, it’s easy to have and care!
What else do you need? In this pandemic time like this, is a good choice for you to have an new activity…
…and having snake plant is a good choice for you to have!
Last thing for sure. This plant need to be care carefully, remember plant need the “love” too.
Alright that’s all for today! Do you have any questions about all of this?
Or do you want to add some method for having and care so snake plant leaves fall over issue won’t occurred again?
Let me know your recommendation from the comment below.
I hope you can now take care your snake carefully and grow it big!
Thanks for reading this article! Bye!