An example of a plant that will benefit from being lightly touched is snake plants. When you let them dry out between waterings, plants like them because they do not require much water. This article will teach you when and how to water snake plant, as well as what you need to know about light, temperature, soil, and seasons. Let’s go, let’s go!
How to Water Snake Plants – The Essentials
Once the top 2/3 of the soil is dry, fully saturate it with dechlorinated tap water or filtered water every 2-3 weeks in the summer and every 6-8 weeks in the winter. Water snake plants need more water if the temperature and humidity are higher, or when the sun is shining more. The following factors will determine how much water you should provide snake plants (Dracaena trifasciata).
Temperature & Humidity
Transpiration can be an issue for snake plants in hotter regions. In warm weather, you will need to water your plant more than you would during cold weather.
A humid environment will result in your plants transpiring more, while a dry climate will not. The air will be dry, therefore you’ll have to water more often.
The Prevailing Light Conditions
The snake plant prefers indirect light, but it can survive in darker places or indirect light as well. Water will be needed at higher intensities and for longer periods of time.
Water Snake Plant During Summer
Snake plants slow down their growth during the winter because of the reduced amount of light. Therefore, they don’t need frequent watering since they don’t use much water.
The soil needs to be watered when the snake plants are dry. Every 15 days, you should check the soil in the summer. Pour 1 cup of water for each inch of dry soil in a small pot. In a medium pot you will need 1 cup; in a large pot you will need 1.5 cups. Water your plants at least once each month during the winter. As well as the measurements of water.
Snake plants resume their growth as the days lengthen and use more water.
When you are using a grow light to provide consistent light throughout the year, the seasons won’t have a dramatic effect on how much you should water your snake plant.
When to Water
Plants should only be watered during the winter months to avoid full soil drying out. The time will be minimal, as plants use less water in the winter than they do in the summer. The temperature could be so freezing that it happens once a month. Your plants will rot if you water them too much in winter.
Always check the soil’s top inch for moisture before watering. After two waterings, the soil must be completely dry. You must follow this rule during the growing season. Ensure the pot is dry as well.
The Soil Mix
Make sure that the soil mix in which you plant your snake plant drains well and allows excess water to run off. When using mixes that are not well-draining, you will need to water less. However, switching to the right soil blend may be the best strategy.
Water to Use
Rainwater or distilled water should be used when watering plants. Be sure to let the tap water stand for at least 48 hours so chlorine, fluoride, etc. can dissipate. I would prefer to see you for a full week.
Ensure the root system doesn’t get shocked by the water by adjusting the temperature to the room. Make sure you don’t drown your plant by flooding the soil. While watering, ensure that the water drains through the drainage holes.