Why my snow blower does not start? When the snow starts to fall, everyone looks forward to it. So when you get stuck with a snow blower that does not start, there is a feeling of frustration. This article has discussed how to troubleshoot and repair your snow blower so that you can enjoy your time in the winter without worrying about what is happening with your snow blower. In this blog, we have an article about compact series gas snow blower that you might want to read about it.
A snow blower or snow thrower is a machine for removing snow from an area where it is problematic, such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway.”Wikipedia.org
What is snow blower
Snow blower is an equipment used to remove snow from the surface of a driveway, walkway, roof, etc. Snow blowers are designed to operate on both hard and soft surfaces. They are powered by an electric motor or a gas engine. The snow blower is fitted with a variety of nozzles to suit the surface it is to be used on. It can be used in both residential and commercial properties.
A snow blower is a mechanical device that clears snow from a surface by collecting it and forcibly throwing it to another location.thecanadianencyclopedia.ca
Why snow blower does not start
Here’s the reasons why snow blower does not start and how to fix it:
Examine the Fuel Tank
Ascertain that your gasoline tank is not empty (and while you’re at it, check the oil) and that the gas is not unclean. You’ll want to get off to a good start with clean, fresh gasoline. If the gasoline has developed a varnish-like film in the carburetor, it is old. Additionally, if you did not add a fuel stabilizer to the gas prior to storage, it may have lost its volatility. If this is the case, the system must be drained through the carburetor. Such problems may be alleviated by switching to an electric snow blower.
After draining it, you may refill it with new gasoline and a fuel stabilizer. If old gasoline has been introduced into the carburetor, the carburetor will very certainly need to be cleaned or replaced by a specialist. Gasoline lines and filters may also get clogged with debris as a result of filthy fuel and may need replacement at the shop.
Adjust the Fuel Shutoff Valve to the ‘On’ position.
The proper position of the switch for the fuel shutdown valve to start your snow blower is easy forgotten if you haven’t used it in months. Flip this switch to the ON position if it is in the OFF position. It’s simple to do, but equally simple to forget.
Examination of the Safety Key Switch
We have not completed our inspection of switches. Certain snow blower engines have a safety key switch (similar to the ones found on lawn mowers) and a red toggle switch. Ascertain that the key is put correctly into the holder and that the red toggle switch is set to the RUN position. Failure to flick any of these switches will result in your snow blower being unable to start. Worse worse, attempting a start-up in such situations may cause the engine to flood.
Consider initiating in ‘Full Choke Mode.’
The term “choke” is despised among athletes. However, there is no stigma attached to using the throttle on a snow blower. Indeed, when starting a snow blower with a cold engine, you want to select FULL CHOKE mode. Additionally, if the outside temperature is above freezing, you may want to avoid priming the carburetor, since this may flood the engine. In this instance, it may be advisable to utilize just choke and omit priming entirely.
How to use snow blower?
Before using a snow blower you must check for leaks in all the joints and valves. Make sure that the blades are clear of any debris. If your snow blower has been stored outside for a long time, make sure that it is well-ventilated before starting up again. You should also clean the spark plugs before each use.
Types of snow blower:
There are different types of snow blowers available in the market today. Most of them have the same basic features but there are some differences between them as well. There are three main types of snow blowers which include push type, pull type and self propelled.
This kind of snow blower has a blade attached to its base. The operator pushes the machine across the lawn and uses his or her feet to move the blade over the ground and plow out the snow. Push type snow blowers are suitable for small areas where space is limited. They do not require much room and hence they are ideal for parking lots, driveways and patios.
This kind is similar to a garden tractor. An electric cable connects it to the engine and controls it through a joystick control. Pull type snow blowers are useful when large spaces need to be cleared. As compared to other types, this one requires more maintenance because it needs regular cleaning, lubrication and sharpening.
This type is similar to the pull type except that it doesn’t require an external power source. These machines don’t have any moving parts like a steering wheel, so they are easier to maintain. Self propelled snow blowers are often referred as zero turn mowers. They come equipped with many attachments including buckets, rakes, rotors and blowers.