A snake plant (Sansevieria) with wrinkles is usually experiencing some type of problem. Snake plants are often affected by water problems, but other factors can also cause them to shrivel and wilt.
If the snake plant has wrinkles, it has been underwatered, has been exposed to high temperatures, or has been exposed to too much sunlight. The plant should be moved to a spot that receives bright indirect light, and the soil should not be flooded as it needs to dry out in order to fix wrinkly leaves. To keep sansevieria healthy, keep the temperature between 55 and 85 degrees Fahrenheit.
Most of the time, wrinkling in snake plant leaves is caused by either overwatering the plant or inadequate watering. However, using the wrong type of soil and fertilizer can also cause this problem.
Causes of a Wrinkled Snake Plant
If the snake plant is in good health, it forms dense stands of leaves via its creeping rhizome. Leafs are stiff and the mature plant usually has dark green leaves with light grey stripes. Typically, the leaves are between two and six feet tall.
Leaves begin to become wrinkled when the environment isn’t favorable.
A snake plant’s wrinkles can be caused by the following factors:
During spring and summer, the dark green leaves of snake plants are thicker and more noticeable, and the gray stripes are larger. When temperatures are high during the hot season, the leaves may wrinkle. The leaves of sansevieria often curl and shrink when the temperature is too high.
The reason why plants wilt and wrinkle is because they lose more water than they receive. Snake plant leaves will curl and shrivel quickly if you fail to water them more often.
You should water more frequently during hot seasons if you were only watering once in cool seasons. It is important not to overwater the snake plant as this can cause root rot and other serious problems.
In the fall, snake plants enter dormancy. Watering is less necessary at this point. Regardless, this state will last through the winter, and no new growth will take place.
In some cases, it may be inadvisable to overwater or reduce the frequency of watering snake plants. When to water sansevierias depends on the time of year, whether it is a wet or dry season, or if they are in a dormant stage.
Snake plants will display wrinkling on their leaves if they lack enough water. In addition, snake plant leaves can develop brown tips when they are drying. You can confirm wrinkling is the result of underwatering by feeling the soil for stiffness or dryness.
A well-draining soil mix is the best choice for snake plants since they’re prone to underwatering problems as well as root rot due to waterlogging. Those who plant Sansevieria in non-draining soil will have their leaves wrinkled due to the risk of being overwatered. In contrast, soil that does not hold water will cause high water loss, which will cause the leaves to wrinkle.
In addition, a soil devoid of minerals will wrinkle the leaves of snake plants. This is why it is important to use fertilizer when planting the snake plant. You may have to transfer your snake plant to another pot if it starts to wrinkle. You should use fresh, well-draining, mineral-balanced soil.
Too Much Sunlight
Snake plants lose water at a high rate when they are exposed to too much sunlight, and their leaves become wrinkled and curled. When placed in a location that receives bright direct sunlight, Sanseveria’s leaves will begin to curl, wrinkle, and develop brown tips.
It is also important to remember that moving the plant in a dark area will also result in a wrinkled snake plant. The leaves lose their texture as the plant struggles to get enough light for photosynthesis.
Consequently, if the plant doesn’t get sufficient light in an east-facing window, then try moving it to the outside from time to time, so that it has access to the sun for photosynthesis.
Shock and Stress
A snake plant may suffer shock as a result of:
- Transporting stress
- A change in the environment
- Household pets nibbling at your plant
When your snake plant is stressed, it starts to wrinkle its leaves. It will eventually adapt to the new environment and flourish again if you just let it be.
The behavior of cats or other pets that play with and nibble at your snake plant can adversely affect it. In the event your house has pets, such as cats, make sure you hang the snake plant at a higher level where they cannot reach it.
Temperature and Humidity
Lower than 10 degrees Fahrenheit is not ideal for growing snake plants. Therefore, if you notice wrinkled snake plant leaves in the winter, those leaves are probably affected by temperature and humidity changes.
During the hot summer months, snake plants are also susceptible to extreme temperatures. As a result of drastic changes in temperature, leaves wrinkle because they are dehydrated.
To prolong the life of your snake plant, keep it out of drafts during winter.
Size of the Pot
Because of the small pots, roots cannot grow as they should, and the plant’s growth is stunted. This will result in the snake plant no longer growing.
The larger the pot, the more likely your plant will be overwatered, resulting in wrinkled leaves. You should thus get a pot that can accommodate a snake plant of the right size. Water should also drain well from the pot so that it does not overflow.
Root Rot Disease
If a snake plant is overwatered, it is likely to develop root rot. In the event of overwatering, the soil becomes waterlogged, and the roots begin to rot. The roots of your snake plant cannot take in nutrients required to thrive in waterlogged soil.
It is possible that your plant is suffering from root rot if its leaves are yellowing and wrinkling. It would be best if you stopped watering your snake plant and got rid of all the roots that have rotten. Once you have removed the rotten roots from the plant, you can restore it to health by using antifungals or charcoal powder.
To grow well, plants require fertilizer. Likewise, the snake plant makes good use of the nutrients provided by fertilizers. When the wrong fertilizer is used or the amount is insufficient, however, the opposite occurs. The leaves of your plant may have curled up and started to dry, so you should check the fertilizer you are using.
The solution to this problem is to water the plant regularly to flush out excess fertilizer. It is also possible to change the soil. Switch your snake plant to a new soil that has a balanced fertilizer.
How to Fix a Wrinkled Snake Plant
Since you now know why your snake plants’ leaves wrinkle, you can take action to remedy the problem. You can fix the snake plant after identifying the cause of its wrinkling by following these steps.
- If your snake plant wrinkles, water it once a month during the spring and once a week during the dry season. Performing this step will fix the problem if excessive water or underwatering in Sansevieria caused it.
- Make sure the potting mix drains well before planting sansevieria. A well-drained soil with a balance of minerals will keep your snake plant from getting wrinkled.
- During the fast-growing season, fertilizer should only be applied once every 1-2 months. You can achieve the best results by using organic fertilizer.
- Bring the wrinkled snake plant into an area that receives bright indirect light. Snake plants should be kept in shade if you live in an area where it is hot.
- To prevent snake plant leaves from wrinkle due to a dry atmosphere, increase humidity in the room where they grow. For this purpose, you can also use a plant humidifier.
- You should keep your snake plant away from cold drafts. Move them to a warmer area of the house.
- Make sure you use filtered water to water your plants. Water your snake plant with tap water instead of filtered water, which can cause wrinkles in the leaves.
Snake plants can be hard to take care of, but if you consider the benefits of having one in your home, you will want to ensure it lives long.
An important feature of snake plants is the ability to clean the air in homes. It absorbs all the carbon dioxide and emits oxygen as waste. As a result, you can keep the air in your house fresh.
You should be aware of the tell-tale signs so that you can act quickly to save this life-saving plant. If you’re not sure if it’s “old age,” you should make sure that your mother-in-law’s tongue is in good health for the rest of her life.