Can push lawn mowers get rained on? Push lawn mowers are one of the most common types of lawn mowers. They are usually a little more expensive than reel lawn mowers, but they are a lot easier to use and maintain. The question is, can push lawn mowers get rained on? Read this article until end to know the reasons behind it. In this blog, we also have an article about best push lawn mower that you might want to read about it.

IN THIS ARTICLE:

Can Push Lawn Mowers Get Rained On

Lawn mower engines are built to withstand a few raindrops, so they shouldn’t be damaged by a light drizzle. Wait till the rain stops before starting your mower and running it briefly. The engine’s heat will remove any moisture from the motor, preventing it from rusting. Clean the lawn mower’s deck and keep it in a dry location. There may be some home repairs needed if the mower won’t start after a heavy storm, but the engine itself is likely unharmed.

Is My Lawnmower at Risk from Moisture?

Let me begin by addressing a few concerns you have expressed regarding your lawn mower. Because lawn mowers aren’t the most affordable pieces of equipment, you might be concerned about their reliability, but don’t worry.

It doesn’t matter if your lawnmower appears to be wet if it is safe to operate.

As long as lawn mowers have existed, this has happened to folks all across the world. Lawn mowers are rugged, well-built machines that can take a beating and keep on ticking.

What Areas of a Lawnmower are Subject to Water Damage?

Despite the fact that lawn mowers should never be operated in the rain or on damp grass, most of the parts are water resistant.

In damp weather, a lawn mower’s outside parts hold up the best. The deck, the handle, and the wheels are all included. Water exposure to your lawn mower’s outside parts will only cause a little amount of rust over time.

Mower blades are made to be exposed to water for brief periods of time. However, the Oregon State University recommends that you keep your lawn mower blades sharp at all times in order to get the best results.

The interior elements of lawn mowers, such as the air filters, carburetors, fuel tanks, and spark plugs, are particularly susceptible to water damage because of their sensitivity. Because of this, only a minimum amount of moisture may reach the lawn mower parts. If you see any of the following signs, your lawn mower may be overly wet:

Stalling
Working at a reduced rate of speed
Inability to start a lawnmower
Regardless of whether you’re using an electric or gas lawn mower, both are water-resistant. As a result, you shouldn’t be concerned if your lawn mower gets a little damp every now and then. Aside from that, it’s important to avoid excessive water exposure.

Wet Lawn Mowers: How to Dry them out

It’s critical that you dry out your lawn mower as soon as you realize it’s been soaked. To begin, dry out your lawn mower by placing it in direct sunlight and cleaning off any remaining water.

After that, you’ll need to be familiar with the process of taking apart your lawnmower. To speed up the drying process, you may want to remove the following items:

An electric motor’s spark plug
Cap for a motor oil bottle
Carburetor
An air filter

The components you remove should be patted dry, but don’t put them back in immediately. Even the most difficult-to-reach parts of your mower, like the hoses, need time to dry out.

Some of you may be asking if lawn mowers can be submerged in water, dried, and then reassembled. Absolutely.

If your lawnmower is damp but still works, you don’t have to take it apart that much. Drying the spark plug and air filter is always a good idea, but you should also turn on your mower and see if it works.

The creaking noises you hear from your lawn mower are nothing to worry about. As the running engine naturally dries up the inside of your mower, you’ll notice that the smell is gone.

Once exposed to a brief but torrential downpour, your lawn mower’s fuel and oil may have become water tainted. We’ll teach you how to handle this in the next sections.