How Dry Does Snake Plant Need To Be? A Complete Guide For Indoor And Outdoor Snake Plants (2021)

How dry does snake plant need? These succulents with thick, moisture-holding leaves are called mother-in-law’s tongues. The built-in watering system allows the plant to survive in its native environment – the dry, rocky tropics of West Africa.

How Dry Does Snake Plant Need?

There are two things related to how dry snake plant need. the first one is how dry they should be between waterings and how dry they should they be in terms of temperatures. Which one would you like to know about? There is no need to choose, since they will all be explained below.

Avoid Excessive Direct Sunlight And Heat

The nature of nake plants is able to thrive under dry conditions, but it does not necessarily mean that you can put them under excessive direct sunlight and heat. It is largely dependent on the heat and amount of sunlight that a snake plant can tolerate. Generally speaking, Snake Plants grow very well in warm climates, with plenty of direct sunlight, as long as it has been accustomed to this.

Your plant will suffer stress if it is placed in direct sunlight or warmer conditions if it is used to lower light levels. Unless your snake plant can tolerate the light, it will develop brown tips. Snake plants can be moved once they have become accustomed to one location. However, you should adjust light and heat levels gradually so that the plant can acclimate. This process is similar to our acclimatization to hotter weather over several weeks.

Avoid Overwatering

Wait until the snake plant’s top two or three inches (5-7.5 cm) of soil are completely dry, then you can water deeply until the water drains through the drainage hole. Plants near heat vents or sunny windows need to be watered more often, although conditions vary. Many people, however, find that two to three weeks’ worth of watering is adequate.

Ensure that the leaves are dry by watering around the inside edge of the pot, and then allow the water to drain freely before replacing the pot on the drainage saucer. You shouldn’t water again until the soil is completely dry. If the foliage starts to look wilted during the winter, water sparingly. It is usually sufficient to do it once a month.

Snake Plants vs Low Humidity Levels

House plants prefer drier conditions indoors. Snake plants have brown tips due to excess water loss from the leaves caused by dry air. Snake plants don’t require high humidity levels to thrive, but you should aim for at least 40%. A digital hygrometer will be a great help to check the relative humidity of the air around your houseplants periodically.

Snake Plants Ideal Temperature

The Sansevieria plant can tolerate a wide range of temperatures in our homes. If your house is comfortable for you, it will be the same for Snake Plants. Make sure they are not exposed to cold drafts and heat or air conditioning vents. You need to bring your snake plant indoors before it gets too cold during the winter, especially if it is outside for the summer.

What Is The Right Temperature?

Since snake plants are tropical plants, they grow well indoors. They prefer temperatures between 60°F and 80°F (16°C to 27°C). Depending on the temperature, the plant may turn brown, yellow, or die as it drops below 50°F (10°C). Frost and freezing temperatures can kill snake plants. There is no need to expose snake plants to temperatures below 50°F (10°C) because snake plants are not cold hardy. When it falls below this point, the snake plant becomes stressed and the tips will turn brown.

How dry does snake plant need? Snake plants that are grown indoors should be able to avoid temperatures that low, but if you keep your snake plants outside in the summer, you will need to bring them in before the lower temperatures of autumn and winter.

More Related Articles

Was this helpful?

Thanks for your feedback!