How to sharpen pruning shears? Pruning shears are a gardener’s best friend. From removing dead branches to shaping shrubs, these tools are essential for anyone who wants to keep their yard looking neat and tidy.
The blades of pruning shears need to be sharpened regularly to keep them in good working order. Read this article until the end to know more about how to sharpen pruning shears. In this blog, we also have an article about best kebtek professional pruning shears that you might want to read about it.
What Is A Pruning Shear?
A pruning shear is a tool that is used for trimming and pruning plants. They are typically used to trim and shape plants, and to remove dead and diseased branches. A pruning shear is a type of hand tool that is used for shaping and trimming plants. These tools are also referred to as shearing tools or hedge clippers. They are generally made of steel with one blade and an adjustable handle.
The pruning shears in this article will be used at the garden center or home improvement store. We will discuss some different uses for these tools including how they can help you get rid of weeds from around your property, cut off grass, trim shrubs, and more.
How To Use A Pruning Shear – Garden Tips And Tricks.
The best part about using a pruning shear is that it helps you save time when doing gardening tasks like weeding or cutting back overgrown plants. It’s easy to use and can be adjusted based on what size you need. There are two types of pruning shears: single-bladed and double-bladed.
You may want to consider getting both blades if you have large trees or bushes that require regular maintenance. When buying pruning shears online, make sure you read the instructions carefully before trying them out. It’s important to know how to use them properly so you don’t cause damage to yourself or your plants. Here are three tips to keep in mind when using pruning shears.
How To Use It Properly
- Always Keep Blades Clean. If you notice rust forming on the blades, try cleaning them with a wire brush and water before continuing your work. This will prevent any potential issues with rusting that could harm you or your plant.
- Cut Off Dead Branches First. Before starting to use your pruning shears, always cut off any dead wood first. Make sure you keep all the leaves intact. Don’t go straight to the trunk because you might end up damaging the tree or causing injury to yourself.
- Hold Tool Horizontally. As you begin to cut away the plant material, hold your pruning shears horizontally and not vertically. If you do it correctly, it should appear as though you are slicing through paper rather than cutting into the plant material itself. If you hold the handles vertically, you risk breaking the blades.
How to Sharpen Pruning Shears
Sharpen your garden pruners at home by following these simple instructions:
Step 1: Clean the filthy shears.
Clean off any accumulated muck before sharpening your cutting instrument. Warm water and a stiff bristles brush are all that is required here.
Soak the shears for a few minutes in a sink of warm soapy water to loosen the grime. Scrub the blades with the stiff brush to eliminate any signs of muck.
When cleaning the shears, use caution. Even apparently dull garden tools, if not handled correctly, may cause serious injuries. To ensure your safety, hold the instrument with the blades facing away from your body while you clean it.
After cleaning the dirt away, rinse the shears and wipe dry with a clean towel to prevent rusting.
Consider disassembling the pair of shears for easy cleaning. Simply release the bolt in the center that connects the two blades to separate the instrument and clean each portion separately.
Step 2: Remove any rust.
Garden equipment, including shears, are prone to rusting, even if they are labeled as stainless steel. Remove any signs of rust before sharpening the instrument for the best results.
Steel wool or sandpaper may be used to remove rust. Depending on how much rust you have, you may use a medium-grit or a high-grit sandpaper. Remove any signs of rust from the blade by scrubbing it.
After that, clean and dry the blades before sharpening the pruner.
Step 3: Properly position the shears.
The location of the shears and the file will have a significant impact on the ease of filing and the result. Poor alignment will require you to spend a significant amount of time attempting to sharpen your shears.
First, turn the pruner blades away from your body. This is not only safe, but it also enables you to grasp the handles comfortably while filing down the blades.
Then, with the bevelled edge of the blade facing up, open the shear blades wide. Most pruners feature a two-sided bevelled edge that must be sharpened on both sides.
If you have a bench vice, use it to secure the shears for quick and safe filling. If you don’t have a vise, you may file with one hand while holding the tool with the other.
Our Latest Post:
- Revamp Your Garden With a Dumpster Rental: A Green Thumb’s Guide
- Revamp Your Garden With a Dumpster Rental: A Green Thumb’s Guide (2023)
- Why Do Wheelbarrow Tires Go Flat? Common Reasons & Solutions
