How to Plow The Garden? There are two ways to plow your garden. You can do it manually or with a tractor. You will need a sleeve hitch if you want to use it. You can read about sleeve hitch in this article: Riding Lawn Mower Sleeve Hitch.
How to plow the garden, why is it important?
What is a Plow Used for in Agriculture?
IN THIS ARTICLE:
Farmers must plow their land in order to get it ready for the fresh crops of the coming season. Horses were used to pull the plow in the days before modern machines to prepare the ground for planting. The plow is now pulled by tractors.
Connect the plow to a strong tractor. Verify the functionality of both pieces of equipment. The dirt will be cut with the plowshare. The earth is elevated and broken up by the plowshare blade.
How to Plow the Garden Using a Tractor
There are 10 steps on how to plow the garden using tractor:
Plan ahead
When to plow your garden depends on the season. Take into account things like the time of year you plant your crops, the soil’s health, the weather, the availability of manure, etc.
Check the fuel, oil, coolant, tire pressure, etc. in your tractor. If you haven’t already decided on a tractor or plow, be sure to read the article’s conclusion, where we briefly cover the various options on the market.
Examination
Check the soil for any large objects, such as stones and tree limbs, that could hurt you, the tractor, or the plow. Additionally, it will be a good idea to trim any long grass in your garden before plowing for two reasons.
In the beginning, this will lessen the possibility of clogging the plow. Second, compared to lengthier clumped grass, chopped grass is simpler to mix and degrade in the soil.
Direction
Before beginning, decide which way to plough. Use the other direction, though, if you discover that this one won’t work in any part of the garden. The most crucial step is to pick a direction and follow it throughout the entire garden.
Adding the Plow
Ensure that the plow is firmly fastened to your tractor’s 3-point hitch. Make sure the limiter chains are securely fastened to the plow by looking at them.
These chains are crucial because they enable the plow to shift slightly laterally when it encounters a rock-like obstruction. But if they’re too loose, your tractor’s rear tires can get damaged by the plow.
Start your first furrow from the right side of the garden after dropping the plow into the earth. Even if you choose the left, nothing will change. This is merely done to make it simpler to demonstrate the remaining steps.
Examining the Depth
Three times the diameter of the seed you’ll be cultivating should be the furrow depth. To find out the recommended depth for each crop, consult the planting instructions. The height regulator on your plow allows you to change the depth.
You can use your tractor’s back hydraulics if it doesn’t have such a feature. The depth will vary throughout the area if the plot is not completely level since the plow will slope with the tractor. The leveling may be altered using the 3-point hitch.
Observing the Tilt
The tilt is the incline at which the plow approaches the ground. The 3-point hitch’s top link is used to adjust it. A deeper furrow will result by lengthening the top link, which will cause the back of the plow to drop the ground.
However, if you stretch it too much, the plow blades will flip and it won’t dig as deeply into the earth. On the other hand, cutting it too short will prevent the plowed earth from turning. With a 180-degree turn of the plowed dirt, the proper tilt creates an equally deep furrow.
Examining the Instruction
Make sure the furrow’s orientation is parallel to the shape of your garden. This is crucial because the alignment of the first furrow will determine how the subsequent ones are aligned. Placing pole markings in the desired direction can help you with alignment.
Finishing the First Furrow
Complete the first furrow all the way to the end of the garden after checking the previous points and making the required changes.
The Following Row
Return the tractor to the beginning of the first furrow. After that, insert the right tires into the first furrow. By doing this, you may ensure that the following furrows will be spaced equally apart while still pointing in the same general direction.
The tractor will now be angled in the direction of the furrow. Adjust the plow’s leveling from the 3-point hitch before beginning the following furrow.
After plowing for 5 feet, halt and assess the area exactly like you did for the first furrow. And, finish the remainder of the garden in the same way.
Other Cultivation
Your garden might require harrowing in addition to plowing. By harrowing, dirt clumps are broken up and the surface is smoothed off. Since plowing is known to leave a rough corrugated surface, it usually comes after that.
Now you know how to plow the garden using a tractor.
Conclusion
Plowing garden is not particularly difficult to accomplish if you know what you’re doing, despite how important it is for your garden.
